Hi Jeff, Can you shutdown the sub and let everything register to pub and then do the testing? This way atleast we can eliminate the sub for troubleshooting purposes.
-- Mustafa Jeff Price (jeffpric) wrote: > > Hi again, > > I was able to access the DNA on SUB, but not the PUB even though both > servers are running the service. > > Here is the output of DNA. Everything seems to be okay. > > *Cisco Unified Communications Manager Dialed Number Analyzer Results * > > > > > * *Results Summary* > o *Calling Party Information* > + *Calling Party* = +14085252001 > + *Partition* = PT_HQ_DEVICES > + *Device CSS* = CSS_HQ_DEVICES > + *Line CSS* = > + *AAR Group Name* = > + *AAR CSS* = > o *Dialed Digits* = 914084252222 > o *Match Result* = RouteThisPattern > o *Matched Pattern Information* > + *Pattern* = \+! > + *Partition* = PT_GLOBAL > + *Time Schedule* = > o *Called Party Number* = +14084252222 > o *Time Zone* = Pacific Standard/Daylight Time > o *End Device* = RL_LOCAL > o *Call Classification* = OffNet > o *InterDigit Timeout* = NO > o *Device Override* = Disabled > o *Outside Dial Tone* = NO > * *Call Flow* > o *TranslationPattern* :*Pattern*= 9.1[2-9]XX[2-9]XXXXXX > + *Positional Match List* = +14084252222 > + *Calling Party Number* = +14085252001 > + *PreTransform Calling Party Number* = 2001 > + *PreTransform Called Party Number* = 914084252222 > + *Calling Party Transformations* > # *External Phone Number Mask* = YES > # *Calling Party Mask* = > # *Prefix* = > # *CallingLineId Presentation* = Default > # *CallingName Presentation* = Default > # *Calling Party Number* = +14085252001 > + *ConnectedParty Transformations* > # *ConnectedLineId Presentation* = Default > # *ConnectedName Presentation* = Default > + *Called Party Transformations* > # *Called Party Mask* = > # *Discard Digits Instruction* = PreDot > # *Prefix* = + > # *Called Number* = +14084252222 > o *Route Pattern* :*Pattern*= \+! > + *Positional Match List* = +14084252222 > + *DialPlan* = > + *Route Filter* > # *Filter Name* = > # *Filter Clause* = > + *Require Forced Authorization Code* = No > + *Authorization Level* = 0 > + *Require Client Matter Code* = No > + *Call Classification* = > + *PreTransform Calling Party Number* = +14085252001 > + *PreTransform Called Party Number* = +14084252222 > + *Calling Party Transformations* > # *External Phone Number Mask* = YES > # *Calling Party Mask* = > # *Prefix* = > # *CallingLineId Presentation* = Default > # *CallingName Presentation* = Default > # *Calling Party Number* = +14085252001 > + *ConnectedParty Transformations* > # *ConnectedLineId Presentation* = Default > # *ConnectedName Presentation* = Default > + *Called Party Transformations* > # *Called Party Mask* = > # *Discard Digits Instruction* = None > # *Prefix* = > # *Called Number* = +14084252222 > o *Route List* :*Route List Name*= RL_LOCAL > + *RouteGroup* :*RouteGroup Name*= Standard Local > Route Group > # *PreTransform Calling Party Number* = +14085252001 > # *PreTransform Called Party Number* = +14084252222 > # *Calling Party Transformations* > * *External Phone Number Mask* = Default > * *Calling Party Mask* = > * *Prefix* = > * *Calling Party Number* = +14085252001 > # *Called Party Transformations* > * *Called Party Mask* = > * *Discard Digits Instructions* = > * *Prefix* = > * *Called Number* = +14084252222 > * *Alternate Matches* > o *Note: Information Not Available* > > Note, that I do have Calling and Called Party Transformation applied > at the GW level as follows: > > Calling: CSS_HQ_CALLING_OUT – PT_HQ_CALLING_OUT > > Called: CSS_HQ_CALLED_OUT – PT_HQ_CALLING_OUT > > Calling Transformation Pattern > > +.! > > PT_HQ_CALLING_OUT > > DDI: Predot > > Called Transformation Pattern > > +.! > > PT_HQ_CALLED_OUT > > DDI: Predot > > I guess the DNA doesn’t go as far as the GW configuration, but I > believe this should work to remove the + before sending out over the > ISDN. Is there something I need on the GW’s CLI to make this work. > I’ve re-attached the MGCPCONFIG.txt file with all of the configs and > output of R1. > > Please help! Thanks. > > Jeff > > *From:* ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Jeff > Price (jeffpric) > *Sent:* Sunday, February 07, 2010 10:59 AM > *To:* ccie_voice@onlinestudylist.com > *Subject:* Re: [OSL | CCIE_Voice] MGCP Gateway Problem > > Good morning everyone, > > Thanks Jeff for the response. I’m going to be looking into all of this. > > However, my configuration is as follow: > > HQ Phones – CSS_HQ_DEVICES (DEVICE, no LINE CSS as of yet) > > Translation Patterns – PT_USA, CSS_GLOBAL > > Route Pattern – PT_GLOBAL > > CSSs > > CSS_HQ_DEVICES: PT_HQ_DEVICES, PT_USA > > CSS_GLOBAL: PT_GLOBAL > > This brings me to the next question, why would DNA not allow me to use > it? Every time I open up the DNA, I get a “DNA Service is still > initializing. Please refresh after some time” or something like that. > Which if you look at the user guide from Cisco, that’s normal. But it > stays like that for over an hour. I can’t actually use the DNA. I’ve > dis-enabled and then re-enabled the Database synchronization and then > restarted the service through the Control Center – Feature Services. > I’ve also gone to Service Activation and then Deactivated and then > Activated, and still the same message for long after it should have > stopped. > > Has anyone seen this issue before? Any suggestions as to how to get > this to work? > > Jeff > > *From:* jgar...@gmail.com [mailto:jgar...@gmail.com] *On Behalf Of > *Jeff Garvas > *Sent:* Saturday, February 06, 2010 2:07 PM > *To:* Jeff Price (jeffpric) > *Cc:* ccie_voice@onlinestudylist.com > *Subject:* Re: [OSL | CCIE_Voice] MGCP Gateway Problem > > Jeff, > > If debug q931 isn't producing output and everything appears to be > registered right I'd assume that you have an issue with your > phone/line CSS, route patterns, route list, route group, etc. > > Have you tried resetting the Route Group? Have you tried the dialed > number analyzer to see where CUCM thinks the calls should be going for > a DN in the particular CSS in use, if anywhere? DNA will tell you if > you have a failure in your design, but it won't tell you to go reset > the Route Group / Gateway etc. > > -Jeff > > On Sat, Feb 6, 2010 at 3:44 PM, Jeff Price (jeffpric) > <jeffp...@cisco.com <mailto:jeffp...@cisco.com>> wrote: > > Hey everyone, > > I wanted see if anyone had any ideas as to what may be wrong here. I > have set up the MGCP gateway correctly as far as I can tell. It is > registered with CUCM. Attached is the GW’s config as well as show > ccm-manager, show isdn status and the call routing elements. > > Everything configuration wise seems to be working. I have a registered > status in CUCM and on the GW. Everything seems pretty standard with > the routing elements. > > I have repeatedly done a no mgcp, mgcp to restart the mgcp process. I > have physically unplugged the t1 cable to restart it. I have deleted > and reconfigured the GW in CUCM as well as on the GW itself. I changed > the “Stop Routing on Unallocated Number” Service Parameter to False > (which I know probably isn’t effecting anything related to this). I’ve > restarted and/or activated/deactivated all of the various related > feature services. I’m sure there’s more I’ve done as I’ve been trying > to figure this out for almost two days. Also, the debug isdn q931 > isn’t producing any output, which is odd to me. I keep getting a fast > busy whenever I dial any numbers. I don’t have access to the PSTN > router’s configuration, however I know it was working as I was able to > make phone calls to it when I first got here, but now that I’ve done > my own configuration it is not working anymore. Also, one of the > engineers who set it up verified the configuration for me. > > Please help! It is very much appreciated. J > > http://www.cisco.com/cisco/web/UK/images/emails/signaturetool/the_human_network_logo.jpg > > > > *Jeff Price > Network Consulting Engineer - Unified Communications Practice* > * > * > jeffp...@cisco.com <mailto:jeffp...@cisco.com> > Phone: *408-525-8293* > Mobile: *408-204-4510* > > > > *Cisco Systems, Inc.* > 170 West Tasman Drive, > San Jose, CA 95134-1706 > USA > Cisco home page <http://www.cisco.com/> > > > > http://www.cisco.com/cisco/web/UK/images/emails/signaturetool/welcome_to_human_network_lo.jpg > > http://www.cisco.com/global/EMEA/brand/signature/capital/green.gifThink > before you print. > > This email may contain confidential and privileged material for the > sole use of the intended recipient. > > Any review, use, distribution or disclosure by others is strictly > prohibited. If you are not the intended > > recipient (or authorized to receive for the recipient), please contact > the sender by reply email and > > delete all copies of this message. > > For corporate legal information go to: > http://www.cisco.com/web/about/doing_business/legal/cri/index.html > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com <http://www.ipexpert.com> > > ------------------------------------------------------------------------ > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com