Earl, I've tried these settings on ESX4 ..still no luck.. .I tried loading ESX 3.5 on my DL380 G4's and it won't load.
I have an older box (G3) that I can re-load ESX 3.5 on. Thomas J Koch Unified Communicatons Consultant CCDA, CCNA, CCVP Cisco IPT Design Specalist CompuCom Cell: 630-808-4910 E-mail:thom.k...@compucom.com From: Hough, Earl [mailto:earl.ho...@pcmall.com] Sent: Sunday, April 04, 2010 11:57 AM To: Thomas Koch; CCIE Voice OSL Subject: RE: [OSL | CCIE_Voice] CUPS7 install on VM EXSi 4 I've not seen the issues with the processor speed so much as the kind and number of processors. I would definitely try doing it with the following spec's: Processors: 1 RAM: 2048 Mb Hard Drive: 80 Gb SCSI NIC: Single OS Type: Red Hat Enterprise Linux 4 Earl Hough CCIE #16508 (R&S/Security) From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Thomas Koch Sent: Sunday, April 04, 2010 12:46 PM To: Hough, Earl; 'CCIE Voice OSL' Subject: Re: [OSL | CCIE_Voice] CUPS7 install on VM EXSi 4 Earl, Thanks.I do have a HP DL380 G3 with ESX 3.5...I'll try that.Have you seen any issue with processor speed of the host box? The G3 I have has 2.8 Ghz processors.the G4 has 3.4 Ghz. I could install ESX3.5 on the G4 and try that as well.. T Thomas J Koch Unified Communicatons Consultant CCDA, CCNA, CCVP Cisco IPT Design Specalist CompuCom Cell: 630-808-4910 E-mail:thom.k...@compucom.com From: Hough, Earl [mailto:earl.ho...@pcmall.com] Sent: Sunday, April 04, 2010 11:19 AM To: Thomas Koch; CCIE Voice OSL Subject: RE: [OSL | CCIE_Voice] CUPS7 install on VM EXSi 4 I've never tried setting up CUPS on ESXi 4 before. I use ESX 3.5 and whenever I create the image for CUPS, I'm using the 32-bit Red Hat Enterprise 4 option, 2GB RAM, and 80 GB hard drive (default SCSI type) and it pretty much works flawlessly there. I've done this with both the base install image of 7.0.2 and incorporating the 7.0.3 patch during installation and each seem to work pretty well. Had been playing with 7.0.5 patch during install, but reverted back to using 7.0.3 instead. Earl Hough CCIE #16508 (R&S/Security) From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Thomas Koch Sent: Sunday, April 04, 2010 12:13 PM To: 'CCIE Voice OSL' Subject: [OSL | CCIE_Voice] CUPS7 install on VM EXSi 4 Team, Has anyone run into an issue with installing CUPS on VMWare? I'm installing CUPS on top of VMWare ESXi 4 on an HP DL380 G4 with 6 GB of RAM and a 200GB of HD. I did dual processors and dual 72 GB disks for the VM..I used the 64 bit Linux option for the VM OS config.. It blows up on the post install script for the DB. Thanks. T Thomas J Koch Unified Communicatons Consultant CCDA, CCNA, CCVP Cisco IPT Design Specalist CompuCom Cell: 630-808-4910 E-mail:thom.k...@compucom.com _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by PC Mall, Inc. Furthermore, PC Mall, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by PC Mall, Inc. Furthermore, PC Mall, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
