No Angel.. I am using srst mode auto-prov none..
I was thinking that if I use all then that will create ephone permenantly so after link comes back up (or primary ccm) then phones will register with the CUCM while ephones will still stay there...I have not tested this but this one colleague of mine had inbound calls issue after phones registred back to CUCM as the call was going to the ehpones instead of taking the voip dial-peer. Have you tested this? vc On Mon, Jun 7, 2010 at 10:00 AM, ccie voice <[email protected]> wrote: > Thanks Angel. > > I am at work but will give it a go today. > > I am just wondering that everytime when phones will go in SRST..do I have > to go into ephones and add the button? this does not look practical. > > I will give it a go anyways. > > vc > > > On Mon, Jun 7, 2010 at 9:39 AM, Angel Perez <[email protected]> wrote: > >> Hi: >> >> Once the ephones have registered to srst add privacy button under ephone. >> >> Let us know, hth >> >> ------------------------------ >> Date: Sun, 6 Jun 2010 21:46:26 +0100 >> From: [email protected] >> >> To: [email protected] >> Subject: [OSL | CCIE_Voice] CBarge in SRST ~(Again) >> >> Hi, >> >> Sorry for the incomplete email earlier. >> Has anyone tried cBarge in SRST mode? I have my conference bridge >> registered to telephony service when it goes into SRST. I have used priority >> 3 as the telephony-service address. When my phones go in SRST mode, I can >> see they have shared line and when I am making a call on this shared line, I >> can see both phones ringing. >> However, if i receive call at one phone and try to Barge in using another >> all I get is a dialtone..no Cbarge softkey or anything even thou Cbarge key >> is configured under ephone template. Also privacy is off at telephony >> service. I even went into ephones and turned the privacy off but it is still >> not working. For some reason its not bringing the remote-in-use softkey >> template. I am getting a new call softkey template. >> >> >> R2#sh ephone >> >> ephone-1[0] Mac:0017.9402.CF34 TCP socket:[1] activeLine:0 REGISTERED in >> SCCP ver 17/9 >> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 >> caps:11 privacy:0 >> IP:192.168.10.22 33399 7961 keepalive 0 max_line 6 >> button 1: dn 5 number 4001 CM Fallback CH1 IDLE CH2 >> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >> IDLE CH7 IDLE CH8 IDLE >> button 2: dn 6 number 4021 CM Fallback CH1 IDLE CH2 >> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >> IDLE CH7 IDLE CH8 IDLE * shared* >> Preferred Codec: g711ulaw >> >> >> ephone-2[1] Mac:0030.94C3.EE93 TCP socket:[3] activeLine:0 REGISTERED in >> SCCP ver 11/9 >> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 >> caps:8 privacy:0 >> IP:192.168.10.17 52129 Telecaster 7960 keepalive 3 max_line 6 >> button 1: dn 7 number 4002 CM Fallback CH1 IDLE CH2 >> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >> IDLE CH7 IDLE CH8 IDLE >> button 2: dn 6 number 4021 CM Fallback CH1 IDLE CH2 >> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >> IDLE CH7 IDLE CH8 IDLE shared >> Preferred Codec: g711ulaw >> >> Adios >> >> ------------------------------ >> Hotmail: Free, trusted and rich email service. Get it >> now.<https://signup.live.com/signup.aspx?id=60969> >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
