Here it is:
ephone-dn-template 1 call-forward busy 12123945220 call-forward noan 12123945220 timeout 8 ! ! ephone-template 1 privacy-button softkeys remote-in-use CBarge Newcall softkeys idle Newcall Redial Cfwdall ! ! ephone-dn 1 octo-line number 4020 no-reg primary conference ad-hoc preference 5 no huntstop ! ! ephone-dn 2 octo-line number 4030 no-reg primary conference ad-hoc preference 1 no huntstop ! ! ephone-dn 3 octo-line number 4040 no-reg primary conference ad-hoc preference 2 no huntstop ! ! ephone-dn 4 octo-line number 4050 no-reg primary conference ad-hoc preference 3 ! ! ephone-dn 5 octo-line number 4001 description +16178634001 name +16178634001 preference 5 ephone-dn-template 1 ! ! ephone-dn 6 octo-line number 4021 description 4021 name 4021 preference 5 ephone-dn-template 1 ! ! ephone-dn 7 octo-line number 4002 description +16178634002 name +16178634002 preference 5 ephone-dn-template 1 ! ! ephone-dn 8 octo-line number 3003 description +16178634003 name +16178634003 preference 5 ephone-dn-template 1 ! ! ephone 1 privacy-button device-security-mode none mac-address 0017.9402.CF34 ephone-template 1 button 1:5 2:6 ! ! ! ephone 2 privacy-button device-security-mode none mac-address 0030.94C3.EE93 ephone-template 1 button 1:7 2:6 ! ! ! ephone 3 privacy-button device-security-mode none mac-address 0018.195A.B173 ephone-template 1 button 1:8 2:6 ! ! R2#show tele R2#show telephony-service dial R2#show telephony-service dial-peer dial-peer voice 20001 pots preference 5 destination-pattern 4020$ no e164 registration progress_ind setup enable 3 port 50/0/1 dial-peer voice 20002 pots preference 1 destination-pattern 4030$ no e164 registration progress_ind setup enable 3 port 50/0/2 dial-peer voice 20003 pots preference 2 destination-pattern 4040$ no e164 registration progress_ind setup enable 3 port 50/0/3 dial-peer voice 20004 pots preference 3 destination-pattern 4050$ no e164 registration huntstop progress_ind setup enable 3 port 50/0/4 dial-peer voice 20005 pots preference 5 destination-pattern 4001$ huntstop call-forward busy 12123945220 call-forward noan 12123945220 progress_ind setup enable 3 port 50/0/5 dial-peer voice 20006 pots preference 5 destination-pattern 4021$ huntstop call-forward busy 12123945220 call-forward noan 12123945220 progress_ind setup enable 3 port 50/0/6 dial-peer voice 20007 pots preference 5 destination-pattern 4002$ huntstop call-forward busy 12123945220 call-forward noan 12123945220 progress_ind setup enable 3 port 50/0/7 dial-peer voice 20008 pots preference 5 destination-pattern 4003$ huntstop call-forward busy 12123945220 call-forward noan 12123945220 progress_ind setup enable 3 port 50/0/8 vc On Tue, Jun 8, 2010 at 12:06 AM, Amy Ryan <ar...@ipexpert.com> wrote: > Can you send over the ephone and ephone-dn configuration as well. Also a > sho telephony-serv dialp > > --- > Amy Ryan – CCIE #24677 (Voice) > Technical Instructor - IPexpert, Inc. > Mailto: *ar...@ipexpert.com > *Telephone: +1.810.326.1444 > Live Assistance, Please visit: www.ipexpert.com/chat <* > http://www.ipexpert.com/chat*> > eFax: +1.810.454.0130 > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities <*http://www.ipexpert.com/communities*> and > our public website at www.ipexpert.com <*http://www.ipexpert.com/*> > > > > ------------------------------ > *From: *ccie voice <cci...@gmail.com> > *Date: *Mon, 7 Jun 2010 23:07:57 +0100 > *To: *Angel Perez <gorr...@hotmail.com>, Amy Ryan <ar...@ipexpert.com> > *Cc: *osl osl <ccie_voice@onlinestudylist.com> > > *Subject: *Re: [OSL | CCIE_Voice] CBarge in SRST ~(Again) > > OK feedback time.... > > I tried doing everything which Amy and Angel suggested and still it did not > work! > > I have this under my telephony now: > > > telephony-service > sdspfarm units 2 > sdspfarm tag 1 sbconf > no privacy > conference hardware > srst mode auto-provision all > srst ephone template 1 > srst dn template 1 > srst dn line-mode dual-octo > max-ephones 5 > max-dn 10 preference 5 > ip source-address 10.10.201.1 port 2000 > max-conferences 8 gain -6 > moh music-on-hold.au > multicast moh 239.1.1.1 port 16384 route 10.10.110.2 10.10.201.1 > transfer-system full-consult > secondary-dialtone 9 > create cnf-files version-stamp 7960 Jun 07 2010 16:28:17 > > > ephone-1[0] Mac:0017.9402.CF34 TCP socket:[1] activeLine:0 REGISTERED in > SCCP ver 17/9 > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 > caps:11 privacy:0 > IP:192.168.10.15 31806 7961 keepalive 17 max_line 6 > button 1: dn 5 number 4001 CH1 IDLE CH2 IDLE CH3 > IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 > IDLE CH8 IDLE > button 2: dn 6 number 4021 CH1 IDLE CH2 IDLE CH3 > IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 > IDLE CH8 IDLE shared > privacy button is enabled > Preferred Codec: g711ulaw > > > > ephone-3[2] Mac:0018.195A.B173 TCP socket:[3] activeLine:0 REGISTERED in > SCCP ver 17/9 > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 > caps:11 privacy:0 > IP:192.168.10.13 31052 7961 keepalive 14 max_line 6 > button 1: dn 8 number 4003 CH1 IDLE CH2 IDLE CH3 > IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 > IDLE CH8 IDLE > button 2: dn 6 number 4021 CH1 IDLE CH2 IDLE CH3 > IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 > IDLE CH8 IDLE shared > privacy button is enabled > Preferred Codec: g711ulaw > > > the dial-peer hunt 3 has been configured. > > Privacy button under ephones configured. > > Now when I press the shared line button to Barge in..I sometimes get a > glimpse of Cbarge Newcall Softkey and then within a fraction of a second it > disappears with the new call softkey template and I get a dial tone. > > Router has been rebooted as well. > > did you give it a go Angel? > > cv > > On Mon, Jun 7, 2010 at 10:37 AM, Angel Perez <gorr...@hotmail.com> wrote: > > Hi, you are partially right: > > When your phones registered back to ucm the e-phone stay there > but dial-peer generated by cme srst doesn't point to anything (you can > varify this with show dial-peer voice summ). > > But it's true that sometimes (it think that it is a bug) the ephone > dial-peer still points to the dn number so once that your phones register > back to ucm you can have problems with incomming calls > > With mgcp you don't have this problem becouse the gw is totally under ucm > control so an incoming call won't match dial-peers , with h323 gw is > different and ephone dial-peer will be matched, but you can easly change > this behaviour like this: > > *telephony service > ... > srst mode auto all > max-dn 10 preference 5 > ... > exit > * > > *dial-peer hunt ? > <0-7> Dial-peer hunting choices, listed in hunting order within each > choice: > 0 - Longest match in phone number, explicit preference, random selection. > 1 - Longest match in phone number, explicit preference, least recent use. > 2 - Explicit preference, longest match in phone number, random selection. > 3 - Explicit preference, longest match in phone number, least recent use. > 4 - Least recent use, longest match in phone number, explicit preference. > 5 - Least recent use, explicit preference, longest match in phone number. > 6 - Random selection. > 7 - Least recent use. > * > *dial-peer hunt 3 > * > *dial-peer voice 1000 voip > description toUCM > destination-pattern 1... > preference 1 > ... > * > > This way when a call enter the gw it will match the preference first > instead longest match and calls will still work in srst mode and out srst > mode. > > Try it and play a littel bit with it, you will find that is not difficult > > ps: also there is another bug with cme srst auto all, if you modify the > auto generated ephones or ephones dn (let say name or label) sometimes when > you go back to ucm and then to srts again the ephone won't take a dn, it > will register to srst but the phone display won't show a line, in this case > reload the router and everithing will start working as expected (this have > been discused on the list) > > As you see cme srst is not pretty stable but with this two trick you can > make it works easly if you have littel experience with it > > hth > > > > > > > > ------------------------------ > Date: Mon, 7 Jun 2010 10:16:47 +0100 > Subject: Re: [OSL | CCIE_Voice] CBarge in SRST ~(Again) > From: cci...@gmail.com > > To: gorr...@hotmail.com > CC: ccie_voice@onlinestudylist.com > > No Angel.. > > I am using srst mode auto-prov none.. > > I was thinking that if I use all then that will create ephone permenantly > so after link comes back up (or primary ccm) then phones will register with > the CUCM while ephones will still stay there...I have not tested this but > this one colleague of mine had inbound calls issue after phones registred > back to CUCM as the call was going to the ehpones instead of taking the voip > dial-peer. Have you tested this? > > vc > > On Mon, Jun 7, 2010 at 10:00 AM, ccie voice <cci...@gmail.com> wrote: > > Thanks Angel. > > I am at work but will give it a go today. > > I am just wondering that everytime when phones will go in SRST..do I have > to go into ephones and add the button? this does not look practical. > > I will give it a go anyways. > > vc > > > On Mon, Jun 7, 2010 at 9:39 AM, Angel Perez <gorr...@hotmail.com> wrote: > > Hi: > > Once the ephones have registered to srst add privacy button under ephone. > > Let us know, hth > > ------------------------------ > Date: Sun, 6 Jun 2010 21:46:26 +0100 > From: cci...@gmail.com > > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] CBarge in SRST ~(Again) > > Hi, > > Sorry for the incomplete email earlier. > Has anyone tried cBarge in SRST mode? I have my conference bridge > registered to telephony service when it goes into SRST. I have used priority > 3 as the telephony-service address. When my phones go in SRST mode, I can > see they have shared line and when I am making a call on this shared line, I > can see both phones ringing. > However, if i receive call at one phone and try to Barge in using another > all I get is a dialtone..no Cbarge softkey or anything even thou Cbarge key > is configured under ephone template. Also privacy is off at telephony > service. I even went into ephones and turned the privacy off but it is still > not working. For some reason its not bringing the remote-in-use softkey > template. I am getting a new call softkey template. > > > R2#sh ephone > > ephone-1[0] Mac:0017.9402.CF34 TCP socket:[1] activeLine:0 REGISTERED in > SCCP ver 17/9 > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 > caps:11 privacy:0 > IP:192.168.10.22 33399 7961 keepalive 0 max_line 6 > button 1: dn 5 number 4001 CM Fallback CH1 IDLE CH2 > IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 > IDLE CH7 IDLE CH8 IDLE > button 2: dn 6 number 4021 CM Fallback CH1 IDLE CH2 > IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 > IDLE CH7 IDLE CH8 IDLE * shared > *Preferred Codec: g711ulaw > > > ephone-2[1] Mac:0030.94C3.EE93 TCP socket:[3] activeLine:0 REGISTERED in > SCCP ver 11/9 > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 > caps:8 privacy:0 > IP:192.168.10.17 52129 Telecaster 7960 keepalive 3 max_line 6 > button 1: dn 7 number 4002 CM Fallback CH1 IDLE CH2 > IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 > IDLE CH7 IDLE CH8 IDLE > button 2: dn 6 number 4021 CM Fallback CH1 IDLE CH2 > IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 > IDLE CH7 IDLE CH8 IDLE shared > Preferred Codec: g711ulaw > > Adios > > ------------------------------ > Hotmail: Free, trusted and rich email service. Get it now. > > > > > ------------------------------ > Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. > <https://signup.live.com/signup.aspx?id=60969> > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
