Can you check the firmware versions? Are they compatible with CME? I had similar issue which turned out to be a firmware problem
-Shikhar 2011/4/11 Roger Källberg <roger.kallb...@cygate.se> > Hi Miron, > Have you tried to reload the router when this happens? If I remember > correctly it's a "known bug" that needs a reload to work again. > > Sincerely > > *Roger Källberg* > CCIE #26199 (Voice) > Consultant > Cygate AB > Eric Perssons väg 21, SE-217 62 MALMÖ > > ------------------------------ > *Från:* Miron Kobelski [findko...@gmail.com] > *Skickat:* den 9 april 2011 20:57 > *Till:* ccie_voice@onlinestudylist.com > *Ämne:* [OSL | CCIE_Voice] CME SRST: calling name configuration > > Hello, > > I was playing with CME SRST today and I encountered the same issue again. I > configured CME SRST with srst mode auto-provision all. > Phones reregistered to SRST correctly, ephone and ephone-dn configuration > appeared in the config. By default, each ephone-dn is configured with CUCM > external phone mask as a calling name. Is it possible to change ephone's > calling name to something other in CME SRST? > > When I changed the name under ephone-dn and restarted the phone. It > reregistered, but DN didn't appear on the button (couldn't make any calls). > Is it normal/expected behaviour or I missed something? > > > best regards > kobel > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com