Unfortunately, I am still stuck. I took two days off from work (Mon, Tue) to work on it and still no success [?] Will keep trying.
Thanks, Voiper On Tue, Nov 15, 2011 at 2:35 PM, Rrcrumm <rrcr...@yahoo.com> wrote: > We're u able to resolve your issue? > > Sent from my iPhone > > On Nov 15, 2011, at 10:32 AM, Voiper <datapack...@gmail.com> wrote: > > Hi Friends: > > Thank you all for you quick and helpful suggestions. It show you are all > very focused and have the determination to get the coveted number. I need > to step up my efforts after seeing how you all quickly helped with > feedback. > > All your help is truly appreciated. > > Voiper > > > @RRCRUMM: > Did you reset the h323 gw in cucm? Do you see an ip address towards the > upper portion of the page above the name/ ip address field? > -> The h323 gw is configured and I see the ip address > outbound calls to pstn using h323 or mcgp gw directly is working > > @Ashwani ash_r...@hotmail.com > Did you bind source interface on HQ router for H323? And same interface's > IP assigned on CUCM? Also did you have incoming dial-peer from CUCM? Paste > your HQ config here. > -> interface FastEthernet0/0.20 > description VOICE > encapsulation dot1Q 20 > ip address 10.10.200.3 255.255.255.0 > ip helper-address 10.10.210.10 > h323-gateway voip bind srcaddr 10.10.200.3 > > HQ router config is attached. > > @Ken Wyan kew...@gmail.com > Pls check your route list rl-test config & digit manipulations etc.. in > rg-test (under rl-test). > If you have done any digit manipulations in rg-test (under rl-test) , your > RP digit-manipulations will not work > Add rg-test as Local Route Group for Device Pool > In addition to debug isdn ---> debug ccapi inout , dialpeer may help to > isolate issue > -> No digit manipulations on any of the above. I tried to keep it as > simple as possible > ran above debug and nothing gets generated. > > @Pradeep Kumar Sharma sonu.netwo...@gmail.com > Verify the registration status of your Route List. > Try to reset it once. > Run the debug voice ccapi inout on H323 Gw and see if the outbound calls > really hitting to the gateway on not ? > -> route list status unknown. Reset many times. What is your registration > status? > > CCAPI: debug voip ccapi inout is ON (filter is OFF) > CCH323 SPI: H225 State Machine tracing is enabled (filter is OFF) > -> above debug show nothing happening. Call just not reaching the h323 gw > > > @Mohd Baqari baqari.voic...@gmail.com > On you gateway, do the following: > 1. Debug cch323 h225 messages. Check if any h323 signaling is reaching the > gateway. > 2. If signaling is received successfully, run the command debug voice > dialpeer. Check which dial peer is matched and whats the configuration of it > 3. If no h323 signaling is received, post cucm traces after making a call > -> above debug show nothing happening. Call just not reaching the h323 gw > Do I need to run RTMT for trace? I installed it on my desktop and ran > trace 'Collect Files' (attached). First time using, so I don't know if I > got the right one? > > > <ccm00000007.txt> > > <ccm00000007.txt> > > <SDL002_100_000010.txt> > > <HQ-RTR.txt> > >
<<33D.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
