If you are using SLRG check to make sure you have Standard Local RG in the RL and assigned the Local GW to the DP
randall
From: Chris Martin <clm.c...@gmail.com>
To: Voiper <datapack...@gmail.com>
Cc: Rrcrumm <rrcr...@yahoo.com>; "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>; "kew...@gmail.com" <kew...@gmail.com>
Sent: Tuesday, November 15, 2011 12:11 PM
Subject: Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?
You said your using SLRG? You did assign a route group to each device-pool and reset, correct?
Chris
Chris
On Tue, Nov 15, 2011 at 1:42 PM, Voiper <datapack...@gmail.com> wrote:
Unfortunately, I am still stuck. I took two days off from work (Mon, Tue) to work on it and still no success
Will keep trying.
Thanks,
VoiperOn Tue, Nov 15, 2011 at 2:35 PM, Rrcrumm <rrcr...@yahoo.com> wrote:
We're u able to resolve your issue?
Sent from my iPhoneHi Friends:
Thank you all for you quick and helpful suggestions. It show you are all very focused and have the determination to get the coveted number. I need to step up my efforts after seeing how you all quickly helped with feedback.
All your help is truly appreciated.
Voiper
@RRCRUMM:
Did you reset the h323 gw in cucm? Do you see an ip address towards the upper portion of the page above the name/ ip address field?
-> The h323 gw is configured and I see the ip address
outbound calls to pstn using h323 or mcgp gw directly is working
@Ashwani ash_r...@hotmail.com
Did you bind source interface on HQ router for H323? And same interface's IP assigned on CUCM? Also did you have incoming dial-peer from CUCM? Paste your HQ config here.
-> interface FastEthernet0/0.20
description VOICE
encapsulation dot1Q 20
ip address 10.10.200.3 255.255.255.0
ip helper-address 10.10.210.10
h323-gateway voip bind srcaddr 10.10.200.3
HQ router config is attached.
@Ken Wyan kew...@gmail.com
Pls check your route list rl-test config & digit manipulations etc.. in rg-test (under rl-test).
If you have done any digit manipulations in rg-test (under rl-test) , your RP digit-manipulations will not work
Add rg-test as Local Route Group for Device Pool
In addition to debug isdn ---> debug ccapi inout , dialpeer may help to isolate issue
-> No digit manipulations on any of the above. I tried to keep it as simple as possible
ran above debug and nothing gets generated.
@Pradeep Kumar Sharma sonu.netwo...@gmail.com
Verify the registration status of your Route List.
Try to reset it once.
Run the debug voice ccapi inout on H323 Gw and see if the outbound calls really hitting to the gateway on not ?
-> route list status unknown. Reset many times. What is your registration status?
CCAPI: debug voip ccapi inout is ON (filter is OFF)
CCH323 SPI: H225 State Machine tracing is enabled (filter is OFF)
-> above debug show nothing happening. Call just not reaching the h323 gw
@Mohd Baqari baqari.voic...@gmail.com
On you gateway, do the following:
1. Debug cch323 h225 messages. Check if any h323 signaling is reaching the gateway.
2. If signaling is received successfully, run the command debug voice dialpeer. Check which dial peer is matched and whats the configuration of it
3. If no h323 signaling is received, post cucm traces after making a call
-> above debug show nothing happening. Call just not reaching the h323 gw
Do I need to run RTMT for trace? I installed it on my desktop and ran trace 'Collect Files' (attached). First time using, so I don't know if I got the right one?
<ccm00000007.txt><ccm00000007.txt><SDL002_100_000010.txt><HQ-RTR.txt>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
