No that is not it I had tried what you said below. I found it in the CUCM service parameters.....
Party Entrance Tone <https://10.10.210.10:8443/ccmadmin/serviceParamSave.do?showall=false#>[image: Required Field] True False True Set this to false and you do not get a tone at the other side. E On Sat, Nov 26, 2011 at 8:10 AM, Gregg Malcolm <gregg.malc...@gmail.com>wrote: > I haven't tried this but from the CUC help pages, you should be able to > disable the beep completely by changing the timeout to zero. > > The following procedure is optional. It adjusts the interval between beeps > while Cisco Unity Connection is recording a phone conversation. > To Adjust the Live Record Beep Interval (Optional) > Step 1 In Cisco Unity Connection Administration, expand *System Settings*, > then click *Advanced > Telephony*. > > 1. On the Telephony Configuration page, in the Live Record Beep > Interval in Milliseconds field, enter the interval (in milliseconds) > between beeps when a phone conversation is being recorded by using the live > record feature. > If the setting is blank, the interval is 15,000 milliseconds. If the > setting is 0, the beep is disabled. > 2. Click *Save*. > > > > On Fri, Nov 25, 2011 at 9:52 PM, Edgar Feliz <ejzi...@gmail.com> wrote: > >> If given the task of configuring live-record but part of the requirement >> states that the TONE NOT be played back to the users when recording has >> begun, how is this done? I have looked in CUC and CCM and don't see a way >> to stop this. >> >> E >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com