I have this seen this also, to be honest I think it shouldn't matter whether it is in threshold 1 or 3 as long as no other COS is in same Threshold of queue 1 of queset 2. When you leave in in threshold 3 I think you should be fine with:
mls qos queue-set output *2* threshold 1 100* *100* 75 *100. Maybe I am completly wrong but thats they way I understood this. Regards Steffen 2012/10/20 Pixar Perfect <pixarperf...@live.com> > The requirement is as follows on Lab 2 QOS section of the 5-Lab Handbook. > "For traffic being sent to the Site A gateway ensure that the traffic > marked with COS 5 is dropped if the queue 1 is 75% full" > > The Solution guide (page 408) has the following solution. > > mls qos queue-set output *2* threshold 1 *75 100 100 100* --> queset > is preconfigured on the port to 2 > mls qos srr-queue output cos-map queue 1 threshold *3* 5 > > .. > My interpretation was to move the Cos 5 into Q1t1 but the command says > threshold 3 .. is this just a typo or am I missing something obvious. > > > Thanks! > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com