Can you make sure that your calling and called gateways and phones are in different Locations? And further, have you set the bandwidth reservation requirement between your intended locations is set to "Mandatory"?
If your calling and called phones are not is expected Locations, and no "Mandatory" reservation is there, then no rsvp is involved. Check and make tests. HTH On Mon, Apr 1, 2013 at 7:26 PM, Saeed IDris <saee...@gmail.com> wrote: > Greeting Experts, > > I need your assistance for RSVP LAB 10 Vol-1 I have configured MTP > ,location and added MTP on CUCM ...and its register working fine plus i > have added IP RSVP bandwidth commend under sub-interface of frame relay link > on > both Gateway HQ and BR1 (RSVP over Frame Relay) the issue that RSVP is > not trigger even if i call (VOIP) between the two different location > after i changed the IP RSVP bandwidth to less than 24k but still i can > initiate more than three calls even i run the debug for both gateway I > can't see any info related to RSVP packet from both Gateway. > > what is the missing on my configuration ? > > Regards, > > Saeed > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -- Suresh Bhandari
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
