The above IOS config seems enough for RSVP to invoke if you have proper MTP DP, MRG and MRGL set to corresponding Device pools. So, this point onwards, if I were you, I would definitely checked through the CUCM GUI pages for errors.
Further, you've written that the calls from HQ to PSTN are not completing.... what about calls from BR1 side to PSTN? And what about intra-site (HQ to HQ and BR1 to BR1) calls? On Mon, Apr 1, 2013 at 11:15 PM, Saeed IDris <saee...@gmail.com> wrote: > > > OK, Suresh here is the Voice Gateway for both sites: > > HQ-VGW: > > interface Serial0/0/0:0 > > no ip address > > encapsulation frame-relay > > fair-queue 64 256 36 > > frame-relay lmi-type ansi > > ip rsvp bandwidth > > ! > > interface Serial0/0/0:0.1 point-to-point ------ to BR1 > > bandwidth 1536 > > ip address 10.10.111.1 255.255.255.0 > > ip ospf mtu-ignore > > snmp trap link-status > > frame-relay interface-dlci 201 > > ip rsvp bandwidth 22 > > ! SCCP -HQ > > > > ! > > sccp local GigabitEthernet0/0.10 > > sccp ccm 10.10.210.10 identifier 2 version 7.0 > > sccp ccm 10.10.210.11 identifier 1 version 7.0 > > sccp > > ! > > sccp ccm group 1 > > bind interface GigabitEthernet0/0.10 > > associate ccm 1 priority 1 > > associate ccm 2 priority 2 > > associate profile 2 register HQCONF > > associate profile 1 register HQXCODE > > associate profile 3 register MTP_G729 > > ! > > dspfarm profile 1 transcode > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > maximum sessions 4 > > associate application SCCP > > ! > > dspfarm profile 2 conference > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > codec g729r8 > > codec g729br8 > > maximum sessions 2 > > associate application SCCP > > ! > > dspfarm profile 3 mtp > > codec g729r8 > > codec pass-through > > rsvp > > maximum sessions software 15 > > associate application SCCP > > ! > > ! > > VGW-BR1 > > interface Serial0/3/0:0 > > no ip address > > encapsulation frame-relay IETF > > fair-queue 64 256 36 > > frame-relay lmi-type ansi > > ip rsvp bandwidth > > ! > > interface Serial0/3/0:0.1 point-to-point > > bandwidth 1536 > > ip address 10.10.111.2 255.255.255.0 > > ip ospf mtu-ignore > > snmp trap link-status > > frame-relay interface-dlci 101 > > ip rsvp bandwidth 22 > > ! > > SCCP-BR1 > > ! > > sccp local Loopback0 > > sccp ccm 10.10.210.10 identifier 2 priority 1 version 7.0 > > sccp ccm 10.10.210.11 identifier 1 priority 2 version 7.0 > > sccp > > ! > > sccp ccm group 1 > > bind interface Loopback0 > > associate ccm 1 priority 1 > > associate ccm 2 priority 2 > > associate profile 1 register BR1_HWCODEC > > associate profile 2 register BR1_HQCONF > > associate profile 3 register BR1_MTP_G729 > > switchback method graceful > > ! > > dspfarm profile 1 transcode > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > codec g729br8 > > codec g729r8 > > codec g722-64 > > maximum sessions 4 > > associate application SCCP > > ! > > dspfarm profile 2 conference > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > codec g729r8 > > codec g729br8 > > codec g722-64 > > maximum sessions 2 > > associate application SCCP > > ! > > dspfarm profile 3 mtp > > codec pass-through > > codec g729r8 > > rsvp > > maximum sessions software 15 > > associate application SCCP > > ! > > Ajay also i need to clarify another issue since Phone1 HQ is already > assign to Location HQ if i dial any PSNT number i got busy tone with Not > Enough Bandwidth error (911,...etc) while the calling is going to locate HQ > Voice gateway same location , already its configured between HQ and HQ no > reservation any idea? > > i will send you the CUCM logs. > > Regards, > > Saeed IDris > > > > * * > > > > > > OK, Suresh here is the Voice Gateway for both sites: > > HQ-VGW: > > interface Serial0/0/0:0 > > no ip address > > encapsulation frame-relay > > fair-queue 64 256 36 > > frame-relay lmi-type ansi > > ip rsvp bandwidth > > ! > > interface Serial0/0/0:0.1 point-to-point ------ to BR1 > > bandwidth 1536 > > ip address 10.10.111.1 255.255.255.0 > > ip ospf mtu-ignore > > snmp trap link-status > > frame-relay interface-dlci 201 > > ip rsvp bandwidth 22 > > ! SCCP -HQ > > > > ! > > sccp local GigabitEthernet0/0.10 > > sccp ccm 10.10.210.10 identifier 2 version 7.0 > > sccp ccm 10.10.210.11 identifier 1 version 7.0 > > sccp > > ! > > sccp ccm group 1 > > bind interface GigabitEthernet0/0.10 > > associate ccm 1 priority 1 > > associate ccm 2 priority 2 > > associate profile 2 register HQCONF > > associate profile 1 register HQXCODE > > associate profile 3 register MTP_G729 > > ! > > dspfarm profile 1 transcode > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > maximum sessions 4 > > associate application SCCP > > ! > > dspfarm profile 2 conference > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > codec g729r8 > > codec g729br8 > > maximum sessions 2 > > associate application SCCP > > ! > > dspfarm profile 3 mtp > > codec g729r8 > > codec pass-through > > rsvp > > maximum sessions software 15 > > associate application SCCP > > ! > > ! > > VGW-BR1 > > interface Serial0/3/0:0 > > no ip address > > encapsulation frame-relay IETF > > fair-queue 64 256 36 > > frame-relay lmi-type ansi > > ip rsvp bandwidth > > ! > > interface Serial0/3/0:0.1 point-to-point > > bandwidth 1536 > > ip address 10.10.111.2 255.255.255.0 > > ip ospf mtu-ignore > > snmp trap link-status > > frame-relay interface-dlci 101 > > ip rsvp bandwidth 22 > > ! > > SCCP-BR1 > > ! > > sccp local Loopback0 > > sccp ccm 10.10.210.10 identifier 2 priority 1 version 7.0 > > sccp ccm 10.10.210.11 identifier 1 priority 2 version 7.0 > > sccp > > ! > > sccp ccm group 1 > > bind interface Loopback0 > > associate ccm 1 priority 1 > > associate ccm 2 priority 2 > > associate profile 1 register BR1_HWCODEC > > associate profile 2 register BR1_HQCONF > > associate profile 3 register BR1_MTP_G729 > > switchback method graceful > > ! > > dspfarm profile 1 transcode > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > codec g729br8 > > codec g729r8 > > codec g722-64 > > maximum sessions 4 > > associate application SCCP > > ! > > dspfarm profile 2 conference > > codec g711ulaw > > codec g711alaw > > codec g729ar8 > > codec g729abr8 > > codec g729r8 > > codec g729br8 > > codec g722-64 > > maximum sessions 2 > > associate application SCCP > > ! > > dspfarm profile 3 mtp > > codec pass-through > > codec g729r8 > > rsvp > > maximum sessions software 15 > > associate application SCCP > > ! > > Ajay also i need to clarify another issue since Phone1 HQ is already > assign to Location HQ if i dial any PSNT number i got busy tone with Not > Enough Bandwidth error (911,...etc) while the calling is going to locate HQ > Voice gateway same location , already its configured between HQ and HQ no > reservation any idea? > > i will send you the CUCM logs. > > Regards, > > Saeed IDris > > -- Suresh Bhandari
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
