Also on CM side with h245/h225 trace on this is the out F/S 05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128): FastStartInfo: Outbound FastStart Triggered - PreAllocating MTP|<CLID::StandAloneCluster><NID::192.168.1.51><CT::2,100,37,1.241129><IP::10.10.202.121><DEV::SEPD4D748FE5095><LVL::State Transition><MASK::0100>
There is a similar message for inbound. Edgar On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz <ejzi...@gmail.com> wrote: > Karen See below for fast connect... Make sure you are looking at the > section that has the RemoteIPAddress with the IP address of the CM. Also > did you enable F/S on the CM? > > VOIP: > ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > CallID=7 > RemoteIPAddress=192.168.1.51 > RemoteUDPPort=17628 > RemoteSignallingIPAddress=192.168.1.51 > RemoteSignallingPort=1720 > RemoteMediaIPAddress=10.10.110.2 > RemoteMediaPort=17628 > RoundTripDelay=0 ms > SelectedQoS=best-effort > tx_DtmfRelay=h245-alphanumeric > FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start > > > Edgar > > > On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson > <karen.johnson...@yahoo.ca>wrote: > >> experts, >> >> i have configure H323 GW to be "Fast start" by using Transcoder and >> enable "fast start" under service voip in IOS GW. >> >> however when i make call and verified using " sh call acti voice" and >> looking at "Fast Connect"= False. >> >> - is there any thing else needed to make this work ? >> - what is the right steps to implement this : Inbound Fast Start to UCM >> and Outbound Fast Start from UCM ? >> >> tks >> K >> >> >> >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
