Thanks Edgar.
I try again now, still not show
________________________________
From: Edgar Feliz <ejzi...@gmail.com>
To: Karen Johnson <karen.johnson...@yahoo.ca>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Wednesday, July 3, 2013 6:20:55 PM
Subject: Re: [OSL | CCIE_Voice] fast start H323
Karen See below for fast connect... Make sure you are looking at the section
that has the RemoteIPAddress with the IP address of the CM. Also did you enable
F/S on the CM?
VOIP:
ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08]
IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08]
CallID=7
RemoteIPAddress=192.168.1.51
RemoteUDPPort=17628
RemoteSignallingIPAddress=192.168.1.51
RemoteSignallingPort=1720
RemoteMediaIPAddress=10.10.110.2
RemoteMediaPort=17628
RoundTripDelay=0 ms
SelectedQoS=best-effort
tx_DtmfRelay=h245-alphanumeric
FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start
Edgar
On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson <karen.johnson...@yahoo.ca> wrote:
experts,
>
>
>i have configure H323 GW to be "Fast start" by using Transcoder and enable
>"fast start" under service voip in IOS GW.
>
>
>however when i make call and verified using " sh call acti voice" and looking
>at "Fast Connect"= False.
>
>
>- is there any thing else needed to make this work ?
>- what is the right steps to implement this : Inbound Fast Start to UCM and
>Outbound Fast Start from UCM ?
>
>
>tksK
>
>
>
>
>
>
>
>
>
>
>
>
>_______________________________________________
>For more information regarding industry leading CCIE Lab training, please
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out
>www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
