Is there goto end step after the successful redirect?

Date: Fri, 5 Jul 2013 11:12:49 -0700
From: karen.johnson...@yahoo.ca
Subject: Re: [OSL | CCIE_Voice] Call Redirect - uccx -- trace
To: khaled_sah...@hotmail.com; avhollo...@gmail.com
CC: ccie_voice@onlinestudylist.com

hi folks.
I used reactive debug, and show right after i press 1. it did not transfer.  
And it stop at Menu.yes CSS is fine

K

        From: khaled Saholy <khaled_sah...@hotmail.com>
 To: Karen Johnson <karen.johnson...@yahoo.ca>; Anthony Holloway 
<avhollo...@gmail.com> 
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> 
 Sent: Friday, July 5, 2013 10:56:36 AM
 Subject: RE: [OSL | CCIE_Voice] Call Redirect - uccx -- trace
   




Can you divide the problem or the script into two section?  I mean, try first 
the upper part of the script , just the menu. Then try the icd in the same 
script. And see where it fails.

You can use the reactive script.
Plz check the css of icd whether in uccx or cm.
can u call that number directly from any extension?


Date: Fri, 5 Jul 2013 09:19:35 -0700
From: karen.johnson...@yahoo.ca
To: avhollo...@gmail.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Call Redirect - uccx -- trace

anybody know what is similar trace setup we can get from UCCX  ?  like: file 
tail activelog  in UCM


        From: Anthony Holloway <avhollo...@gmail.com>
 To: Karen Johnson <karen.johnson...@yahoo.ca> 
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> 
 Sent: Friday, July 5, 2013 9:37:36 AM
 Subject: Re: [OSL | CCIE_Voice] Call Redirect - uccx
   
It could be that you created the menu connection, but you forgot to click the 
"1" to in the dial pad.

Screenshot attached.
Anthony Holloway



On Thu, Jul 4, 2013 at 1:59 PM, Karen Johnson <karen.johnson...@yahoo.ca> wrote:



i script "Call redirect" to extension 5001 when press 1,  by hard code and 
variable, both of them did not work.
Usually pretty simple and just work, but not this time.

Each time I press 1 , just said "Please try again" . 


What is most likely  I miss here in configuration?

Script:
-------
- Accept
- Menu, press 1 , call redirect 5001
- Select Resource CSQ
- End

tks

    

_______________________________________________

For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com



Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com



    
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com                                         


                                          
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to