no go to End state after redirect, do i need?
________________________________
From: khaled Saholy <khaled_sah...@hotmail.com>
To: Karen Johnson <karen.johnson...@yahoo.ca>; Anthony Holloway
<avhollo...@gmail.com>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Friday, July 5, 2013 12:36:23 PM
Subject: RE: [OSL | CCIE_Voice] Call Redirect - uccx -- trace
Is there goto end step after the successful redirect?
________________________________
Date: Fri, 5 Jul 2013 11:12:49 -0700
From: karen.johnson...@yahoo.ca
Subject: Re: [OSL | CCIE_Voice] Call Redirect - uccx -- trace
To: khaled_sah...@hotmail.com; avhollo...@gmail.com
CC: ccie_voice@onlinestudylist.com
hi folks.
I used reactive debug, and show right after i press 1. it did not transfer.
And it stop at Menu.
yes CSS is fine
K
________________________________
From: khaled Saholy <khaled_sah...@hotmail.com>
To: Karen Johnson <karen.johnson...@yahoo.ca>; Anthony Holloway
<avhollo...@gmail.com>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Friday, July 5, 2013 10:56:36 AM
Subject: RE: [OSL | CCIE_Voice] Call Redirect - uccx -- trace
Can you divide the problem or the script into two section? I mean, try first
the upper part of the script , just the menu. Then try the icd in the same
script. And see where it fails.
You can use the reactive script.
Plz check the css of icd whether in uccx or cm.
can u call that number directly from any extension?
________________________________
Date: Fri, 5 Jul 2013 09:19:35 -0700
From: karen.johnson...@yahoo.ca
To: avhollo...@gmail.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Call Redirect - uccx -- trace
anybody know what is similar trace setup we can get from UCCX ? like: file
tail activelog in UCM
________________________________
From: Anthony Holloway <avhollo...@gmail.com>
To: Karen Johnson <karen.johnson...@yahoo.ca>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Friday, July 5, 2013 9:37:36 AM
Subject: Re: [OSL | CCIE_Voice] Call Redirect - uccx
It could be that you created the menu connection, but you forgot to click the
"1" to in the dial pad.
Screenshot attached.
Anthony Holloway
On Thu, Jul 4, 2013 at 1:59 PM, Karen Johnson <karen.johnson...@yahoo.ca> wrote:
>
>i script "Call redirect" to extension 5001 when press 1, by hard code and
>variable, both of them did not work.
>Usually pretty simple and just work, but not this time.
>
>Each time I press 1 , just said "Please try again" .
>
>What is most likely I miss here in configuration?
>
>Script:
>-------
>- Accept
>- Menu, press 1 , call redirect 5001
>- Select Resource CSQ
>- End
>
>tks
>
>
>_______________________________________________
>For more information regarding industry leading CCIE Lab training, please
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out
>www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
