I haven't worked on 8" drives since the early 80's with th exception of the RX02 drives on my PDP-8.

And DEC worked their own "magic" on those drives :)

Thanks for the help.

On 1/31/2024 3:59 PM, Chuck Guzis via cctalk wrote:
On 1/31/24 13:03, Mike Katz via cctalk wrote:
Michael,

Thank you, that was what I was planning as my next step.  I haven't
checked to see if the service manual has a full schematic.

The main purpose of my message on here was to see if I was missing
something obvious like an option trace cut or something like that that I
missed when I checked the manual.

Thanks again,
Mike -

There is indeed a schematic in the 842 service manual PDF page 87 is
what you're looking for.  Since the LEDs are always powered, you need
only be concerned with the output of the phototransistor.  DMM is fine;
no scope necessary.   An opto going bad is not completely unknown on
these drives.  (I have a couple of the 842s--good drives, otherwise)

Diskette drives really are non-intelligent devices...

--Chuck



Reply via email to