This happened to me too! With Version 9.2. After installing it, I could not
boot my NT 4.0 sp6a server without a blue screen of death reporting a
Inaccessible boot device if I recall correctly.
I had recently installed the same software on 3 of our other servers with
the same configuration without any problems. Luckily the problems occurred
on one of our dev servers. It was a pain to fix. It seemed to do damage to
the master boot record.
What did symantec say was the problem?
Brook
At 04:17 PM 21/04/01 -0700, you wrote:
>A failed installation (attempting to upgrade ver. 8 to ver. 10) on an NT4,
>sp6 server literally destroyed the server OS, making it impossible to boot
>the OS without a "blue screen." This just happened to be an important
>production server without a ghosted system partition. We had to rebuild from
>scratch on another box. Almost lost a Very Important Client or two.
>
>When I contacted Symantec, they charged me $29.95 to tell me that I was
>"hosed."
>
>If you are not using PCAnywhere, do not start. If you have an older version,
>upgrade with the greatest of risk.
>
>
>
>Rick Colman
>
>
>
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
