I am doing the same. Moving to a 396, moderately built, but not over 400hp. I have a plain jane 10 bolt non-posi. Thinking about doing rear disc while I am doing the "frame-off".
Sooooo how does one go about knowing what 12 bolts will fit if you don't buy one of these expensive "made to order" 3rd party brand spanking new 12 bolts built for racing? What GM products would have a 12 bolt, posi, and rear disc? Which would be good donor cars? Keep in mind that around here junk yards that deal with cars older than 1985 are more rare than a rice burner beating a big block Chevy. Steve -----Original Message----- From: [EMAIL PROTECTED] [mailto:owner-chevelle-list@;chevelles.net] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, November 06, 2002 12:59 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Changing Engines You will more than likely need to throw a nice 12 bolt in there too. The stock 10 bolt peg leg rears usually don't hold up to the torque of a big block. Make sure you have all the pulleys, brackets, and other stuff for a big block also Tom ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]