Thanks for the reply Herb. I found that one. The one I'm talking about is the tailpipe hanger in the back, not the hangers that hold the mufflers. I think they go on the frame somewhere, but I can't figure out exactly where. I did just watch the flowmaster installation video again and realized it said the hole may need to be enlarged on some Chevelles (their installation is on a 64 malibu and I have a 71). That might be what's been throwing me off. I'll have to take another look later tonight.
Rodney. 71 Chevelle El Mirage, AZ ----- Original Message ----- From: "Herbert Lumpp" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 11, 2002 4:51 PM Subject: Re: [Chevelle-List] List archive and exhaust hanger location > Hi Rodney, > > The stock location for the exhaust hangers is on the rear cross member. If > you get under the car and look up at the crossmember, you'll see a small > hole (may or may not be threaded) on the outer most end on both sides. A > bit further in toward the center, you see two more holes drilled on the > vertical side of the crossmember. > > These probably aren't very clear locations, but each hanger uses two bolts, > one goes up towards the bed, the other goes towards the front or back > (depending which way you start the bolt) of the car. > > If you have a 2002 Year One catalog, look on page 106, middle of page, left > side. Maybe the picture of the hangers will help you understand my > description better. > > cYa- > > Herb Lumpp > 1966 El Camino > ACES 3509, MCC 528 > http://users.adelphia.net/~hlump/ > > ----- Original Message ----- > From: "Rodney." <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, November 11, 2002 11:46 AM > Subject: Re: [Chevelle-List] List archive and exhaust hanger location > > > > On a side note. If anyone who has installed the Flowmaster 2-1/2" exhaust > > kit on their car has a picture (or REALLY detailed instructions) of where > > the rearmost hanger is supposed to bolt in, I could really use it. It > says > > to use the stock location, but 1) I don't know where that is because the > > last person who did exhaust made their own holes and stuff. 2) The > bracket > > doesn't seem to line up anywhere and I'm stumped trying to figure it out. > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]