Thanks a lot Bill, :o)
Just one thing, I don’t know if I explained well, did you take the measurement at the edge between where the front molding ends and where the rear molding begins or did you start at the rear molding edge going straight forward ?? Med Vennlig Hilsen/Kind Regards/Cordiali Saluti André Broe Jensen -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Lessenberry Sent: 11. januar 2004 00:47 To: The Chevelle Mailing List Subject: RE: [Chevelle-list] Need two measurement of off a 1968 Chevelle At 05:08 PM 1/10/2004, you wrote: >Would someone with a 1968 Chevelle coupe be so kind to take a >measurement for me ? > >What I need is to know if the front wheel is centered in the front >wheelwell. Nope >Lets say, by measuring the wheelwell between where the front molding >ends and where the rear molding begins (just to have two reference >points), I mean from the edge of the wheelwell, not the molding itself. 30 1/4" >I would like to have this measurement (should be around 30/32", but I >don't have my numbers here). > >I would also like to know if the center of the wheel is at center of >this measurement or if its moved front or aft by any degree. The wheel center is appx 13 7/8" from the front--I.E. the wheel is forward of the centerline of the opening. >I get my wheelcenter to be moved back about 3/4" and that doesn't seem >right, I'm still in time to change before finish welding so please help >me if you are able to do that. Hope this helps. BL
