Can't figure this out. Have disks on the
front (early camaro) and stock drums on the rear. Installed a new 8"
brake booster and master cylinder, and a Tilton prop, valve on the
rear brakes. After bleeding the brakes I still can't get sufficient
pressure to the fronts even with the rears restricted 100% (valve all the way
in) to get acceptable front braking.
The front calipers are single piston. It all
worked before I installed the booster. It has good vacuum.
Any suggestions? Copy Dave
Larry Williams
|
- [Chevelle-list] Brakes - 65 Chevelle Larry Williams
- Re: [Chevelle-list] Brakes - 65 Chevelle =2 Larry Williams
- Re: [Chevelle-list] Brakes - 65 Chevelle Wayne
- Re: [Chevelle-list] Brakes - 65 Chevelle Larry Williams
- Re: [Chevelle-list] Brakes - 65 Chevelle 65ss.com
- Fw: [Chevelle-list] Brakes - 65 Chevelle Clint Hooper