Hi all,
while configuring an OSPF process for a VRF on a Cisco 3550-12G
(running 12.2(25)SE) I notice that the command "passive-interface"
is unavailable. How can this be? Is there another way I can suppress
routing updates on an interface?
Relevant parts of the configuration:
!
ip vrf SAN
rd 29468:1
!
interface Loopback1
ip vrf forwarding SAN
ip address 172.17.0.242 255.255.255.255
!
interface Vlan390
ip vrf forwarding SAN
ip address 172.17.0.30 255.255.255.252
!
interface Vlan391
ip vrf forwarding SAN
ip address 172.16.8.1 255.255.252.0
!
router ospf 64512 vrf SAN
log-adjacency-changes
auto-cost reference-bandwidth 10000
capability vrf-lite
area 0 authentication message-digest
network 172.16.0.0 0.15.255.255 area 0
!
Regards,
Lukas Garberg
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
