We are using the RSP720 and 3CXLs. Both have performance issues when dealing with multiple BGP sessions, When one of the full bgp peer flaps or when there is a link flap the other routing protocols start to flap as well. I'll try to tweak the timers in the mean time. Usually the CPU usage is around 70%.
On Wed, Sep 28, 2011 at 1:16 PM, Waseem <[email protected]> wrote: > Hi Manuel, > > What are the supervisor engines that you are using on the 7600 routers. > > Regards, > Waseem > > > > > On Wed, Sep 28, 2011 at 6:47 AM, Waseem <[email protected]> wrote: > > Hi, > > We've been in the same situation, a small note: per slot capacity of the > ASR9K is 320G it takes 40G and 100G SPAs while for NE40E-X3 is 40G, almost > the same as Cisco's 7600. > > Regards, > Waseem > > ------------------------------ > *From:* Manuel Marín <[email protected]> > *To:* [email protected] > *Sent:* Wednesday, September 28, 2011 9:56 AM > *Subject:* [c-nsp] Huawei NE40E-X3 vs Cisco AS9K > > Hi > > We are currently looking for alternatives to upgrade cisco 76XX routers > and > we are comparing Huawei NE40E-X3 vs Cisco ASR9K. I was wondering if someone > can share their experience with Huawey routers as Core MPLS routers. > > Any advice would be greatly appreciated > > Thanks > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > -- > Manuel Marín > Transtelco Inc. > 1.9152172232 > > > > -- Manuel Marín Transtelco Inc. 1.9152172232 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
