On Wed, 2012-01-18 at 13:10 +0000, Dobbins, Roland wrote: > One can check one's 6500s in order to see if table insertion errors > are occurring, and I recommend doing so for anyone who's running > pre-Sup2T 6500s.
And for posterity: Check this with e.g. "show mls netflow table-contention detailed", which outputs something like this: Earl in Module 5 Detailed Netflow CAM (TCAM and ICAM) Utilization ================================================ TCAM Utilization : 62% ICAM Utilization : 0% Netflow TCAM count : 81879 Netflow ICAM count : 1 Netflow Creation Failures : 0 Netflow CAM aliases : 0 Earl in Module 6 Detailed Netflow CAM (TCAM and ICAM) Utilization ================================================ TCAM Utilization : 25% ICAM Utilization : 0% Netflow TCAM count : 33183 Netflow ICAM count : 1 Netflow Creation Failures : 0 Netflow CAM aliases : 0 The "Netflow Creation Failures" is the important bit. -- Peter _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/