For the SIP Dial Rule, all you want it to have is a PLAR with Button 1 set. Don't enter the number you want to PLAR to. Then just set up PLAR like you would for a SCCP phone with a new CSS/partition/blank translation pattern.
On Fri, Mar 13, 2015 at 3:30 PM, Barry Howser <[email protected]> wrote: > Hello everyone. > > I have an ATA190 that needs to do a plar to 911. My dial plan uses "9" to > access an outside line (including the 911 pattern). > > I created a SIP dial rule and added a plar pattern. I added a parameter > called "911" in the description and then added 9911 in the value field. I > saved, applied config and restarted. > > I have applied that SIP Dial Rule to the ATA190 device's sip dial rule > section and reset the ATA. When I take either of the lines off hook with an > analog phone, I just get dial tone .... no PLARing. > > What am I doing wrong? > > thanks > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
