Simon,
Issue the command show port capabilities mod#/port# and this will confirm that
you can use ports from any module in the 6500 to create a fec/gec.
Joe
Simon Watson wrote:
> Hi Guys
>
> I have a catalyst 6509 with 2 * Gigabit ethernet ports on the supervisor
> module(module1) & 3 further modules with 8 * Gigabit ethernet ports on each
> module(modules 2,3 & 4).
>
> I initially wanted to set up a Gigabit Etherchannel with one of the ports on
> the supervisor module with one of the Gigabit Ethernet ports on module 4.
>
> However I'm sure that I remember reading somewhere that you can only set up
> etherchannels with ports that are grouped together, which would mean that I
> cannot adopt what I have mentioned above.
>
> Can someone please confirm this
>
> Many Thanks
>
> Simon
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
