Any ports from the same type of module can be grouped together into
an administrative group, and that group is the etherchannel. For
detailed information you can reference:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_2/cofigide/channel.htm
--
Tom Wojciaczyk
Simon Watson wrote:
>
> Hi Guys
>
> I have a catalyst 6509 with 2 * Gigabit ethernet ports on the supervisor
> module(module1) & 3 further modules with 8 * Gigabit ethernet ports on each
> module(modules 2,3 & 4).
>
> I initially wanted to set up a Gigabit Etherchannel with one of the ports on
> the supervisor module with one of the Gigabit Ethernet ports on module 4.
>
> However I'm sure that I remember reading somewhere that you can only set up
> etherchannels with ports that are grouped together, which would mean that I
> cannot adopt what I have mentioned above.
>
> Can someone please confirm this
>
> Many Thanks
>
> Simon
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
