Hi Everyone,
Here is the scenario 3600 router connected via eth0/1 to 2924 switch which
then connects to LAN PC's. Switch is doing flat switching (no config).
Router is not doing anything fancy just connecting to the switch and then to
an ISDN line. All very basic, but the PC's are loosing packets when pinging
the router? They drop aprox. 10% of pings. The switch has been replaced as
well as all the cables. The Router is running IOS 11.2. I don't know where
to go from here, any suggestions would be greatly appreciated.
Cheers,
Keith
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
