Simply do not buy cisco for LAN. I had tones of
problem when using them in the LAN. However, they are
good for WAN.
--- Keith Sharratt <[EMAIL PROTECTED]>
wrote:
> Hi Everyone,
>
> Here is the scenario 3600 router connected via
> eth0/1 to 2924 switch which
> then connects to LAN PC's. Switch is doing flat
> switching (no config).
> Router is not doing anything fancy just connecting
> to the switch and then to
> an ISDN line. All very basic, but the PC's are
> loosing packets when pinging
> the router? They drop aprox. 10% of pings. The
> switch has been replaced as
> well as all the cables. The Router is running IOS
> 11.2. I don't know where
> to go from here, any suggestions would be greatly
> appreciated.
>
> Cheers,
> Keith
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
