In order to do frame-relay with a back-to-back cable, one router must be
configured as a switch - frame-relay switching (global-config) and the
interface on the switch must be configured as a logical dce - frame-relay
interf-type dce (int-config). When I have done it, i also had to map to my
local interface with frame-relay map in order to ping the local interface.
"Vic Feferberg" <[EMAIL PROTECTED]> wrote in message
8g5ud7$kgj$[EMAIL PROTECTED]">news:8g5ud7$kgj$[EMAIL PROTECTED]...
> I would like to setup frame relay back to back, but when I do what
happens
> is that the line protocol comes up and shortly after comes down again.
>
> Is it possible to set this up in a lab situation without a telco
connection?
>
> TIA
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
