Joe answer was great but I would add that OSPF allows Route Summarization
--
Lou Nelson, CCNA, CCDA
Joe Martin <[EMAIL PROTECTED]> wrote in message
8genl5$kj5$[EMAIL PROTECTED]">news:8genl5$kj5$[EMAIL PROTECTED]...
> Perfect with minor issues. RIP V1 only supports FLSM and OSPF supports
> VLSM. So it depends on the IP addressing. Diameter of the network. RIP
> support 16 hops and OSPF is unlimited.
>
> That answer should have been good enough for most people though. Good
luck,
>
> JOE
> CCNP, CCDP, and a few other things...
> CCIE Lab - May 27/28
>
>
> ""Billy Monroe"" <[EMAIL PROTECTED]> wrote in message
> 8gen5g$j1f$[EMAIL PROTECTED]">news:8gen5g$j1f$[EMAIL PROTECTED]...
> > Hello:
> >
> > An interviewer asked if I could enable RIP and OSPF on the same network.
> > I answered that it is possible to overlap protocols, but it is not
> > recommended. I said that OSPF has an Administrative Distance lower than
> RIP,
> > so OSPF will be the procotol in use.
> >
> > Is that a complete/correct answer ?
> >
> > Billy
> > CCNA
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
