It will not work :-)
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mark
Sent: Tuesday, June 06, 2000 12:19 PM
To: [EMAIL PROTECTED]
Subject: HSRP Question
When configuring HSRP, Cisco gives the example of:
interface ethernet 0
ip address 1.0.0.1 255.0.0.0
standby 1 ip 1.0.0.4
standby 1 preempt
standby 1 priority 110
standby authentication microdot
The question is:
If the group number ie; standby "1", is not included such as the following,
what happens?
Example:
interface ethernet 0
ip address 1.0.0.1 255.0.0.0
standby ip 1.0.0.4
standby preempt
standby priority 110
standby authentication microdot
Thanks,
Mark
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
