Sorry,
But just to add to my last message. If you don't configure a group number
you are then assign the default group number of "zero". So you do have a
group number either way. But my previous message still holds.
EF
-----Original Message-----
From: Feliz, Edgar
Sent: Tuesday, June 06, 2000 1:15 PM
To: 'Tom Thomas'; Mark; [EMAIL PROTECTED]
Subject: RE: HSRP Question
Mark,
This WILL work, but only if you have ONE interface configured for HSRP on
each router. If you are going to have Multiple interfaces configured for
HSRP on one router then you have to have the Standby group number.
EF
-----Original Message-----
From: Tom Thomas [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 06, 2000 12:44 PM
To: Mark; [EMAIL PROTECTED]
Subject: RE: HSRP Question
It will not work :-)
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mark
Sent: Tuesday, June 06, 2000 12:19 PM
To: [EMAIL PROTECTED]
Subject: HSRP Question
When configuring HSRP, Cisco gives the example of:
interface ethernet 0
ip address 1.0.0.1 255.0.0.0
standby 1 ip 1.0.0.4
standby 1 preempt
standby 1 priority 110
standby authentication microdot
The question is:
If the group number ie; standby "1", is not included such as the following,
what happens?
Example:
interface ethernet 0
ip address 1.0.0.1 255.0.0.0
standby ip 1.0.0.4
standby preempt
standby priority 110
standby authentication microdot
Thanks,
Mark
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
