You need the group number.
mms> -----Original Message-----
mms> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
mms> Mark
mms> Sent: Tuesday, June 06, 2000 9:19 AM
mms> To: [EMAIL PROTECTED]
mms> Subject: HSRP Question
mms>
mms>
mms> When configuring HSRP, Cisco gives the example of:
mms>
mms> interface ethernet 0
mms> ip address 1.0.0.1 255.0.0.0
mms> standby 1 ip 1.0.0.4
mms> standby 1 preempt
mms> standby 1 priority 110
mms> standby authentication microdot
mms>
mms> The question is:
mms>
mms> If the group number ie; standby "1", is not included such as
mms> the following,
mms> what happens?
mms>
mms> Example:
mms>
mms> interface ethernet 0
mms> ip address 1.0.0.1 255.0.0.0
mms> standby ip 1.0.0.4
mms> standby preempt
mms> standby priority 110
mms> standby authentication microdot
mms>
mms>
mms> Thanks,
mms> Mark
mms>
mms>
mms> ___________________________________
mms> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
mms> FAQ, list archives, and subscription info: http://www.groupstudy.com
mms> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
mms>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
