Plug the crossover cable into the router using the plug labled DCE. If you
do not know whick plug on your cross-over cable is DTE ot DCE then just plug
it in and do a:
show controller
/James Hilving
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Babashola Madariola
Sent: Thursday, July 06, 2000 6:28 AM
To: [EMAIL PROTECTED]
Subject:
Hi
Would like to know the commands issued to make a router a DCE.
Thanks in advance
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
