Hi Jeff,
Since you're not specifying what it is that is not working, I suspect that
it is the old Hyperterminal error. On the "build-in" Hyper Terminal that
comes with NT, the ctrl-break doesn't work. I can't remember where I found
mine, but if you go on-line and search for Hyperterminal, you should be able
to find one where the error has been corrected.
I had the same problem when I got to that part in the book, and I was
getting very frustrated over it, because I thought that it was something I
had overlooked.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Jeff Duchin [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 14, 2000 1:00 PM
To: [EMAIL PROTECTED]
Subject: Password recovery
Problem. I've got a 2505 and I'm trying to recover the password on it. I've
tried all the steps on Cisco's website below and no dice.
http://www.cisco.com/warp/public/474/pswdrec_2500.html#proc
I'm connecting through the console port using Hyperterminal on an NT box.
Any help would be much appreciated.
Cheers-n-Beers,
Jeff
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
