In addition:
Having an old copy of the config and comparing it to the last sh conf that
took place before I got timed out
>From saved config
set password $2$DgrG$Htli9koaQU733mDiAWhY70
set enablepass $2$XIgz$h1pOGFyddveGlVAFCdrrk/
>From running before lockout
set password $1$DgrG$Htli9koaQU733mDiAWhY70
set enablepass $2$XIgz$h1pOGFyddveGlVAFCdrrk/
the only diff I can see is the $1 and $2
----- Original Message -----
From: "cdmb" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 22, 2001 12:51 PM
Subject: password recovery
> I am trying to recover or reset a password on a 5500. =20
>
> When I connected to change passord I got the following:
> CORE2_prod> (enable) set password ?
> <cr>
> CORE2_prod> (enable) set password blabla
> Usage: set password
> CORE2_prod> (enable) set password =20
> Enter old password:=20
> Sorry password incorrect.
>
> After time-out of line I can not seem to log back into the switch.
>
>
> Thoughts: Is there a way to change the pass via snmp with out loading =
> and entire new config or to change password w/ out reboot.
>
> I am uncertain if I tftp a config containing the new password (via =
> snmp) would it merge the command in to running or will it blank or =
> overwrite it.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
