The telnet access is allowed unless the router was rebooted and possibly
lost its configuration.
Thanks,
Stan Rossetti
Russia Services Group
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Phone: (256) 544-5031
Beeper: 544-1183 pin # 0112
<<...>>
-----Original Message-----
From: J K [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, July 26, 2000 3:11 PM
To: [EMAIL PROTECTED]
Subject: Re: Telnet Problems
you need to allow vty access on vty 0 4
conf t
line vty 0 4
config-line------------
login
password stan
ctrl+z
try it
>From: "Rossetti, Stan" <[EMAIL PROTECTED]>
>Reply-To: "Rossetti, Stan" <[EMAIL PROTECTED]>
>To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
>Subject: Telnet Problems
>Date: Wed, 26 Jul 2000 14:36:20 -0500
>
>To all,
>
>I have been trying to telnet to remote router (2501) and the
connection is
>opened, but I never receive a password prompt. I telnetted to a
directly
>connected router and did a "sh cdp neigh det" and the router is
listed as a
>cisco neighbor. I believe telnet uses a layer 3 protocol (TCP/Port
23) and
>cdp operates at layer 2. What could be the problem???
>
>Thanks,
>
>
>
>Stan Rossetti
>
>
>Russia Services Group
>Email: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
>Phone: (256) 544-5031
>Beeper: 544-1183 pin # 0112
>
> <<...>>
>
>___________________________________
>UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info:
http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]