I guess I need somebody on site to log into the router through the console
port and see if the router config was corrupted somehow. Thanks for
everybodies help
Thanks,
Stan Rossetti
Russia Services Group
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Phone: (256) 544-5031
Beeper: 544-1183 pin # 0112
<<...>>
-----Original Message-----
From: Roger Wang [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, July 26, 2000 3:39 PM
To: Rossetti, Stan; [EMAIL PROTECTED]
Subject: RE: Telnet Problems
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of
> Rossetti, Stan
> Sent: Wednesday, July 26, 2000 3:36 PM
> To: '[EMAIL PROTECTED]'
> Subject: Telnet Problems
>
>
> To all,
>
> I have been trying to telnet to remote router (2501) and the
connection is
> opened, but I never receive a password prompt.
If you got in, that means "no login" was specified in that router's
config,
so no password is required. If you didn't get in, that means
there's no
password set, and thus you couldn't connect thru the VTY line.
HTH,
Rog
> I telnetted to a directly
> connected router and did a "sh cdp neigh det" and the router is
> listed as a
> cisco neighbor. I believe telnet uses a layer 3 protocol
> (TCP/Port 23) and
> cdp operates at layer 2. What could be the problem???
>
> Thanks,
>
>
>
> Stan Rossetti
>
>
> Russia Services Group
> Email: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
> Phone: (256) 544-5031
> Beeper: 544-1183 pin # 0112
>
> <<...>>
>
> ___________________________________
> UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
