Try extended ping command. Most likely, either your router
or the remote one has multiple ip addresses.
Jim Xie
At 02:36 PM 07/26/2000 -0500, Rossetti, Stan wrote:
>To all,
>
>I have been trying to telnet to remote router (2501) and the connection is
>opened, but I never receive a password prompt. I telnetted to a directly
>connected router and did a "sh cdp neigh det" and the router is listed as a
>cisco neighbor. I believe telnet uses a layer 3 protocol (TCP/Port 23) and
>cdp operates at layer 2. What could be the problem???
>
>Thanks,
>
>
>
>Stan Rossetti
>
>
>Russia Services Group
>Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>Phone: (256) 544-5031
>Beeper: 544-1183 pin # 0112
>
> <<...>>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
