This is a snip of a config that will limit the IP Address defined in the
access list (105) to 128k on the Ethernet Interface.
!
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
rate-limit input access-group 105 128000 128000 128000 conform-action
transmit exceed-action drop
rate-limit output access-group 105 128000 128000 128000 conform-action
transmit exceed-action drop
!
access-list 105 permit ip any host 10.1.1.2
access-list 105 permit ip any host 10.1.1.10
!
Hope it helps
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kiarash Bodouhi
Sent: Tuesday, August 01, 2000 6:10 AM
To: [EMAIL PROTECTED]
Subject: Traffic shaping
Hi
Has anyone worked with traffic-shape command on interfaces?
I checked it with an ethernet interface it seems it doesn't
work. Actually it restricts the traffic but not to the rate
I gave. Is it possible to use it on serial interfaces as well?
Regards
Kiarash
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
