The load command can be used for a backup interface:
Using the configuration that follows, BRI 2/0 is activated only when the
load on serial 0 (the primary line) exceeds 75 percent of its bandwidth. The
backup line is deactivated when the aggregate load between the primary and
backup lines is within five percent of the primary line's bandwidth:
interface serial 1/0
ip address 172.20.1.4 255.255.255.0
backup interface bri 2/0
backup load 75 5
This information was found on the following site:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2010.htm#xtocid29884
13
Don
-----Original Message-----
From: FRS [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 04, 2000 10:55 AM
To: [EMAIL PROTECTED]
Subject: Re: Traffic Shaping
Michael,
Thanks for the reply.
Is there any 'load' command that specified percentages example, ' load 30'
meaning 30% utilization?
Thanks,
""Michael Fountain"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> There is a 'load-interval' command that you can use to specify how often
the
> router averages the load on an interface, in 30second intervals.
Normally
> when you do a 'show interface' you get a five minute averate. With the
> load-interval command you can change that.
>
> It that it, or are you looking at a different command?
>
>
>
> >
> >Hi,
> >
> >What does the IOS 'load' command do in traffic shaping and QOS
situations?
> >
> >Thanks
> >
> >
> >**NOTE: New CCNA/CCDA List has been formed. For more information go to
> >http://www.groupstudy.com/list/Associates.html
> >_________________________________
> >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> >FAQ, list archives, and subscription info: http://www.groupstudy.com
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
