Thank you very much for your hint. I checked it on one of my routers
and it worked. But unfortunately the actual gateway that I would
like to set the speed limit on, has a 11.2 IOS and does not have
this command. The only command which is available is traffic-shape.
Do you have any comments on this as well?
Regards
Kiarash
Russ Kreigh wrote:
>
> This is a snip of a config that will limit the IP Address defined in the
> access list (105) to 128k on the Ethernet Interface.
>
> !
> interface Ethernet0
> ip address 10.1.1.1 255.255.255.0
> rate-limit input access-group 105 128000 128000 128000 conform-action
> transmit exceed-action drop
> rate-limit output access-group 105 128000 128000 128000 conform-action
> transmit exceed-action drop
> !
> access-list 105 permit ip any host 10.1.1.2
> access-list 105 permit ip any host 10.1.1.10
> !
>
> Hope it helps
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Kiarash Bodouhi
> Sent: Tuesday, August 01, 2000 6:10 AM
> To: [EMAIL PROTECTED]
> Subject: Traffic shaping
>
> Hi
>
> Has anyone worked with traffic-shape command on interfaces?
> I checked it with an ethernet interface it seems it doesn't
> work. Actually it restricts the traffic but not to the rate
> I gave. Is it possible to use it on serial interfaces as well?
>
> Regards
> Kiarash
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
