Don,
The command I am referring to is just 'load 30'.
There is no other words after or before 'load'.
All help appreciated.
""Barnhill, Don"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> The load command can be used for a backup interface:
>
> Using the configuration that follows, BRI 2/0 is activated only when the
> load on serial 0 (the primary line) exceeds 75 percent of its bandwidth.
The
> backup line is deactivated when the aggregate load between the primary and
> backup lines is within five percent of the primary line's bandwidth:
>
> interface serial 1/0
> ip address 172.20.1.4 255.255.255.0
> backup interface bri 2/0
> backup load 75 5
>
> This information was found on the following site:
>
http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2010.htm#xtocid29884
> 13
>
> Don
>
>
>
> -----Original Message-----
> From: FRS [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, October 04, 2000 10:55 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Traffic Shaping
>
>
> Michael,
>
> Thanks for the reply.
> Is there any 'load' command that specified percentages example, ' load 30'
> meaning 30% utilization?
>
> Thanks,
>
> ""Michael Fountain"" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > There is a 'load-interval' command that you can use to specify how often
> the
> > router averages the load on an interface, in 30second intervals.
> Normally
> > when you do a 'show interface' you get a five minute averate. With the
> > load-interval command you can change that.
> >
> > It that it, or are you looking at a different command?
> >
> >
> >
> > >
> > >Hi,
> > >
> > >What does the IOS 'load' command do in traffic shaping and QOS
> situations?
> > >
> > >Thanks
> > >
> > >
> > >**NOTE: New CCNA/CCDA List has been formed. For more information go to
> > >http://www.groupstudy.com/list/Associates.html
> > >_________________________________
> > >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > >FAQ, list archives, and subscription info: http://www.groupstudy.com
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
_________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
> >
> > Share information about yourself, create your own public profile at
> > http://profiles.msn.com.
> >
> > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> > http://www.groupstudy.com/list/Associates.html
> > _________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
