Look also at the (if used) trunk encapsulation, use ISL prefered else
802.1q, but be sure to use the same at both ends,
Ruud
-----Oorspronkelijk bericht-----
Van: Chris McCoy [mailto:[EMAIL PROTECTED]]
Verzonden: donderdag 3 augustus 2000 7:33
Aan: David Jones
CC: [EMAIL PROTECTED]
Onderwerp: Re: FastEtherchannel configuration
I just noticed...this was fixed in IOS 12.0(5.2)XU.
Chris M.
----- Original Message -----
From: "Chris McCoy" <[EMAIL PROTECTED]>
To: "David Jones" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000 7:59 PM
Subject: Re: FastEtherchannel configuration
> Hi David,
>
> This is an interesting problem. I do have a couple of questions about
it:
>
> 1) Are you using trunking between the 6009 & the 3500's with VLANs?
> 2) Do you have VTP pruning turned on in the 6009?
>
> The IOS-based Cisco switches have a nasty habit of not working with VTP
> pruning, causing the 6009 to shut off VLANs to a switch. It's quite
> possible this is what's happening.
>
> Chris M.
>
> ----- Original Message -----
> From: "David Jones" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, August 02, 2000 11:01 AM
> Subject: FastEtherchannel configuration
>
>
> > Does anyone have any experience configuring FastEtherchannel on Cisco
> > switches? I have two scenarios:
> >
> > Cisco 3524 ==== Cisco 6009 ===== Cisco 3524
> > Running two xover cables to each 3524. When I configure what I believe
to
> > be correct on the 6000 and the 3500's assigning two ports each to the
> > channel, I end up losing connectivity and have to remove the channel
> config.
> >
> > Those switches are now in a production environment so for now, I have
two
> > 3524's, two xover's between them, trying to setup up the etherchannel.
So
> > far, I can't tell that I've been successful. Any suggestions or hints?
> >
> > Thanks,
> >
> > Dave
> >
> >
> >
> > <<David Jones.vcf>>
> >
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
