Hey Team, I cannot figure this out. I've configured lots of virtual links, but no matter what I do this isn't working. I had md5 authentication configured for Area 0, but to isolate the problem, I removed authentication and the virtual link still isn't up. I need another set of eyes (or two) looking at this. Please help if you can!
Here's the topology: Area 2 (Loopback 0) | R2 \ \ FR Area 1 / \ R5 R6 \ / Area 0 Ethernet Here are the salient config snippets: R2 ! interface Loopback0 ip address 192.168.2.2 255.255.255.255 ip ospf network point-to-point ! interface Serial1.256 multipoint ip address 172.16.56.2 255.255.255.248 ip ospf priority 255 frame-relay map ip 172.16.56.2 105 frame-relay map ip 172.16.56.5 105 broadcast frame-relay map ip 172.16.56.6 106 broadcast no frame-relay inverse-arp ! router ospf 1 log-adjacency-changes area 1 virtual-link 192.168.5.5 area 1 virtual-link 192.168.6.6 network 172.16.56.0 0.0.0.7 area 1 network 192.168.2.2 0.0.0.0 area 2 ! R5 interface Ethernet0 ip address 172.16.200.5 255.255.255.128 ip ospf hello-interval 15 ! interface Serial0 ip address 172.16.56.5 255.255.255.248 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 172.16.56.2 501 broadcast frame-relay map ip 172.16.56.5 501 frame-relay map ip 172.16.56.6 501 broadcast no frame-relay inverse-arp frame-relay lmi-type cisco ! router ospf 1 log-adjacency-changes area 1 virtual-link 192.168.2.2 network 172.16.56.0 0.0.0.7 area 1 network 172.16.200.0 0.0.0.127 area 0 network 192.168.5.5 0.0.0.0 area 5 ! R6 interface Serial0 ip address 172.16.56.6 255.255.255.248 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 172.16.56.2 601 broadcast frame-relay map ip 172.16.56.5 601 broadcast frame-relay map ip 172.16.56.6 601 no frame-relay inverse-arp frame-relay lmi-type cisco ! interface FastEthernet0 ip address 172.16.200.6 255.255.255.128 ip ospf hello-interval 15 half-duplex ! router ospf 1 log-adjacency-changes area 1 virtual-link 192.168.2.2 network 172.16.56.0 0.0.0.7 area 1 network 172.16.200.0 0.0.0.127 area 0 network 192.168.6.6 0.0.0.0 area 6 ! R2#sh ip ospf vir Virtual Link OSPF_VL5 to router 192.168.5.5 is down Run as demand circuit DoNotAge LSA allowed. Transit area 1, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, 40, Wait 40, Retransmit 5 Virtual Link OSPF_VL4 to router 192.168.6.6 is down Run as demand circuit DoNotAge LSA allowed. Transit area 1, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, 40, Wait 40, Retransmit 5 R2# Trust me on the router-IDs for the virtual link statements - I have triple-checked them. I have reloaded the routers with no luck. What am I missing here?! Thanks! Kevin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69640&t=69640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]