Hi, Congratulation that you solve it out.
> network type. Shouldn't the mismatch have caused my neighbor relationship > to be affected? Since OPSF network type was non-broadcast network, the hello interval is 30 second and the dead interval is 120. These interval times match the point-to-multipoint and this meet the need to form neighboring relationship. However, these will not help to run OSPF correctly. The behavior of non-broadcast is different that point-to-multipoint. Example, From the result of "show ip ospf int" The network was nonbroadcast and there is BDR. In point-to-multipoint there is no DR/BDR. Please correct me if I'm wrong, Netchild, ""Kevin Love"" wrote in message news:[EMAIL PROTECTED] > Tom, > > Congratulations, it appears that you hit the nail right on the head. Router > ID was not an issue - I just failed to show you the loopback interfaces. > The issue was apparently network type. As soon as I hard-set R2s network > type to point-to-multipoint (it was, as you correctly pointed out, > non-broadcast by default), the virtual link came up. What I now don't > understand is why I had a full neighbor relationship before I changed the > network type. Shouldn't the mismatch have caused my neighbor relationship > to be affected? > > Thanks for the tip! > Kevin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69766&t=69640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
