Hi Kevin, can you set the default values for ospf hello interval. can you post the result of "show ip ospf int" and "show ip ospf data" from all the three routers.
NetChild, ""Kevin Love"" wrote in message news:[EMAIL PROTECTED] > Hey Team, > > I cannot figure this out. I've configured lots of virtual links, but no > matter what I do this isn't working. I had md5 authentication configured > for Area 0, but to isolate the problem, I removed authentication and the > virtual link still isn't up. I need another set of eyes (or two) looking at > this. Please help if you can! > > Here's the topology: > > Area 2 (Loopback 0) > | > R2 > \ > \ > FR > Area 1 > / \ > R5 R6 > \ / > Area 0 > Ethernet > > Here are the salient config snippets: > > R2 > ! > interface Loopback0 > ip address 192.168.2.2 255.255.255.255 > ip ospf network point-to-point > ! > interface Serial1.256 multipoint > ip address 172.16.56.2 255.255.255.248 > ip ospf priority 255 > frame-relay map ip 172.16.56.2 105 > frame-relay map ip 172.16.56.5 105 broadcast > frame-relay map ip 172.16.56.6 106 broadcast > no frame-relay inverse-arp > ! > router ospf 1 > log-adjacency-changes > area 1 virtual-link 192.168.5.5 > area 1 virtual-link 192.168.6.6 > network 172.16.56.0 0.0.0.7 area 1 > network 192.168.2.2 0.0.0.0 area 2 > ! > > R5 > > interface Ethernet0 > ip address 172.16.200.5 255.255.255.128 > ip ospf hello-interval 15 > ! > interface Serial0 > ip address 172.16.56.5 255.255.255.248 > encapsulation frame-relay > ip ospf network point-to-multipoint > frame-relay map ip 172.16.56.2 501 broadcast > frame-relay map ip 172.16.56.5 501 > frame-relay map ip 172.16.56.6 501 broadcast > no frame-relay inverse-arp > frame-relay lmi-type cisco > ! > router ospf 1 > log-adjacency-changes > area 1 virtual-link 192.168.2.2 > network 172.16.56.0 0.0.0.7 area 1 > network 172.16.200.0 0.0.0.127 area 0 > network 192.168.5.5 0.0.0.0 area 5 > ! > > R6 > > interface Serial0 > ip address 172.16.56.6 255.255.255.248 > encapsulation frame-relay > ip ospf network point-to-multipoint > frame-relay map ip 172.16.56.2 601 broadcast > frame-relay map ip 172.16.56.5 601 broadcast > frame-relay map ip 172.16.56.6 601 > no frame-relay inverse-arp > frame-relay lmi-type cisco > ! > interface FastEthernet0 > ip address 172.16.200.6 255.255.255.128 > ip ospf hello-interval 15 > half-duplex > ! > router ospf 1 > log-adjacency-changes > area 1 virtual-link 192.168.2.2 > network 172.16.56.0 0.0.0.7 area 1 > network 172.16.200.0 0.0.0.127 area 0 > network 192.168.6.6 0.0.0.0 area 6 > ! > > R2#sh ip ospf vir > Virtual Link OSPF_VL5 to router 192.168.5.5 is down > Run as demand circuit > DoNotAge LSA allowed. > Transit area 1, Cost of using 65535 > Transmit Delay is 1 sec, State DOWN, > Timer intervals configured, Hello 10, 40, Wait 40, Retransmit 5 > Virtual Link OSPF_VL4 to router 192.168.6.6 is down > Run as demand circuit > DoNotAge LSA allowed. > Transit area 1, Cost of using 65535 > Transmit Delay is 1 sec, State DOWN, > Timer intervals configured, Hello 10, 40, Wait 40, Retransmit 5 > R2# > > Trust me on the router-IDs for the virtual link statements - I have > triple-checked them. I have reloaded the routers with no luck. What am I > missing here?! > > Thanks! > Kevin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69679&t=69640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
