Hi, I am having a problem with setting up a backup line with 2 ISDN routers (2503) they are connected with a serial connection and a ISDN as backup.
I can ping the serial ip adresses...but if i do an extended ping and lets say i ping the interface 1000 times and disconnect the Serial cable it should come up with the ISDN line but t does not come up. This is allso very strange ... I have RouterA and RouterB... When i log into the routerB and i tupe a no shutdown command on the BRI interface i get this: RouterB#config t Enter configuration commands, one per line. End with CNTL/Z. RouterB(config)#interface bri0 RouterB(config-if)#no shut RouterB(config-if)# %LINK-3-UPDOWN: Interface BRI0:1, changed state to down %LINK-3-UPDOWN: Interface BRI0:2, changed state to down %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from unknown , call lasted 81 seconds %ISDN-6-DISCONNECT: Interface BRI0:2 disconnected from unknown , call lasted 82 seconds %ISDN-6-LAYER2DOWN: Layer 2 for Interface BRI0, TEI 102 changed to down %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 103 changed to up It comes UP again...that is strange isnt it? These are my configs for the routers: ############################ RouterA######################## RouterA#sh run Building configuration... Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname RouterA ! enable password cisco ! username RouterB password 7 030752180500 isdn switch-type basic-net3 ! interface Ethernet0 ip address 195.1.1.1 255.255.255.0 no keepalive shutdown ! interface Serial0 backup delay 5 20 backup interface BRI0 ip address 193.1.1.1 255.255.255.0 encapsulation ppp no fair-queue clockrate 64000 ! interface Serial1 no ip address shutdown ! interface BRI0 ip address 196.1.1.1 255.255.255.0 encapsulation ppp dialer idle-timeout 90 dialer map ip 196.1.1.2 name RouterB broadcast 21 dialer-group 1 no fair-queue ppp authentication chap ppp multilink ! router rip network 195.1.1.0 network 193.1.1.0 network 196.1.1.0 ! no ip classless dialer-list 1 protocol ip permit ! line con 0 password cisco login line aux 0 line vty 0 4 login ! end RouterA#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 193.1.1.0/24 is variably subnetted, 2 subnets, 2 masks C 193.1.1.0/24 is directly connected, Serial0 C 193.1.1.2/32 is directly connected, Serial0 R 196.1.1.0/24 [120/1] via 193.1.1.2, 00:00:09, Serial0 ############################# RouterB########################### RouterB#sh run Building configuration... Current configuration: ! version 11.2 service timestamps debug datetime localtime no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname RouterB ! enable password cisco ! username RouterA password 7 030752180500 isdn switch-type basic-net3 ! interface Ethernet0 ip address 197.1.1.1 255.255.255.0 no keepalive shutdown ! interface Serial0 ip address 193.1.1.2 255.255.255.0 encapsulation ppp ! interface Serial1 no ip address shutdown ! interface BRI0 ip address 196.1.1.2 255.255.255.0 encapsulation ppp dialer idle-timeout 90 dialer map ip 196.1.1.1 name RouterA broadcast 20 dialer-group 1 no fair-queue ppp authentication chap ppp multilink ! router rip network 193.1.1.0 network 197.1.1.0 network 196.1.1.0 ! no ip classless dialer-list 1 protocol ip permit ! line con 0 line aux 0 line vty 0 4 password cisco login ! end RouterB#sho ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 193.1.1.0/24 is variably subnetted, 2 subnets, 2 masks C 193.1.1.1/32 is directly connected, Serial0 C 193.1.1.0/24 is directly connected, Serial0 C 196.1.1.0/24 is directly connected, BRI0 Please help me with this... Thank You Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70386&t=70386 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]