Just by looking at your BOM (Bill of Materials) you will not be able to connect to the Telco circuit without an External CSU/DSU. The serial interfaces require this. If you would have purchased the VWIC-MFT-T1 then you would be able to handle the both the voice and data internal to the box.
Layer 1 - nothing else works without out it!!!! tlh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of J B Sent: Thursday, May 29, 2003 11:25 AM To: [EMAIL PROTECTED] Subject: Re: Help with Cisco 3745 configuration [7:69765] J B wrote: > > John Neiberger wrote: > > > > >>>> J B 5/29/03 8:39:15 AM >>> > > >Hi, Everyone > > >I just been awarded the responsibility of installing 4 3745 > > Cisco routers. > > > > >The local phone company wanted $5500 dollars for the > > installation and my > > >employer thinks is to much. I was looking at the Cisco > > website for sample > > >configurations but I couldn't find them. I need to share the > > T1 channels > > >link for voice and data. I haven't done Cisco for like 2 > > years. Can > > >someone help me with some guidance to find some information > in > > how to do > > that. > > > > > >Thanks > > >JBary > > > > Are your routers handling the voice traffic or are you simply > > splitting this > > off at the CSU/DSU so that the router only sees data traffic? > > > > John > > > > > > Splitting the line with external CSU/DSU's for each site > Some channels for voice and the rest for data. > > I have the following equipment: > > > 3725 (3) Qty > 3700 Series, 2-Slot, Dual FE, Multiservice Access Router > Cisco 3725 Series IOS IP/IPX/APPLETALK > 2-Port Serial WAN Interface Card > V.35 Cable, DTE Male to Smart Serial, 10 Feet > > 3745 (1) Qty > > 3700 Series, 4-Slot, Dual FE, Multiservice Access Router > Cisco 3745 Series IOS IP/IPX/APPLETALK > 4-Port Serial Network Module > V.35 Cable, DTE, Male, 10 Feet > > Jb > I just talk to my manager and he's telling me that no CSU/DSU's were ordered because this routers are suppose to be able to do everything. So, No external CSU's splitting of the line; all is suppose to be configure within the Cisco IOS. Thanks JB Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70907&t=69765 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
